Title here
Summary here
Blog
FPGA accelerators to get a standard software interface
Red Hat and FPGA vendors plan to define a standard software interface for FPGA accelerator boards.
February 17, 20162 minutes
Unboxing Samsung V-NAND SSD 950 Pro M.2 NVM Express
Unboxing the Samsung 950 Pro NVMe M.2 SSD for use with an FPGA via PCI Express.
February 13, 20161 minute
QuickPlay reinvents FPGA design
QuickPlay offers a high-level C/C++ development platform aiming to make FPGA design more accessible.
January 26, 20162 minutes
Running a lwIP Echo Server on a Multi-port Ethernet design
Testing a multi-port Ethernet design by running a lwIP echo server on the ZedBoard with Ethernet FMC.
January 5, 201611 minutes
PicoZed Unboxing
Unboxing the PicoZed 7Z030 SoM for developing network tapping and latency measurement applications.
January 4, 20161 minute
FPGA Network tap: Designing the Ethernet pass-through
Designing a transparent Ethernet pass-through in Vivado as the foundation for an FPGA network tap.
December 29, 20157 minutes
Using AXI Ethernet Subsystem and GMII-to-RGMII in a Multi-port Ethernet design
Building a multi-port Gigabit Ethernet design in Vivado using AXI Ethernet and GMII-to-RGMII IP cores.
December 8, 201516 minutes
ARTY: The $99 Artix-7 FPGA eval kit
A look at the new $99 ARTY Artix-7 FPGA board with Arduino shield support and IoT capabilities.
October 1, 20151 minute
KickStarter Campaign Launched: OnCourse Goggles
Announcing a Kickstarter campaign for OnCourse Goggles, a navigation device for open water swimmers.
August 18, 20151 minute
Ethernet gets robust
The Robust Ethernet FMC with rugged form factor and improved isolation is now available for purchase.
July 31, 20151 minute